Tight Fit® Drill Kit - Collet Style: Aircraft Style Right Angle Drill Attachment

Description:

The 00106 Collet Style Kit uses straight shank drill bits (3/32", 1/8", 5/32", and 3/16") with matching collets, instead of the need for threaded shank drill bits. The Kit includes: a comfortable, compact, non-slip right-angle drill attachment suitable for use with any portable power drill; four short length (1.1875") National Aerospace Standard 907B non-wandering precision twist drill bits; four precision-machined threaded collets for each of the listed diameters; and a tight fit three-way steel wrench. Instructions/warranty information is also included.

Click on image to enlarge.

DRILLING SUGGESTIONS

To reduce the chance of gear failure and to extend tool life, please follow these suggestions.

1. Reduce RPM speed and drilling pressure at drill "break through".
2. Drill small holes first and then enlarge the holes progressively.
3. Peck drill deep holes to clear chips from the flutes.
4. Coolant use will extend tool life.
5. Re-point drill bits when they become dull.

CAUTION: Always wear safety glasses when using these tools. Do not use TightFit® Drills and attachments counter clockwise (in reverse). Do not exceed 2500 RPM. Keep tools out of the reach of childern.

3/32" Precision Collet

Precision machined collet with a 3/32" hole. Black oxided to prevent corrosion while enhancing appearance.

1/8" Precision Collet

Precision machined collet with a 1/8"
hole. Black oxided to prevent corrosion while enhancing appearance.

5/32" Precision Collet

Precision machined collet with a 5/32" hole. Black oxided to prevent corrosion while enhancing appearance.

3/16" Precision Collet

Precision machined collet with a 3/16" hole. Black oxided to prevent corrosion while enhancing appearance.

3/32" Short Length Drill Bit

A 3/32" Short length (1.1875") drill with a 135 degree split point, and made of High Speed Steel (M2). It is black oxided to prevent corrosion while enhancing appearance.

1/8" Short Length Drill Bit

A 1/8" Short length (1.1875") drill with a 135 degree split point, and made of High Speed Steel (M2). It is black oxided to prevent corrosion while enhancing appearance.

5/32" Short Length Drill Bit

A 5/32" Short length (1.1875") drill with a 135 degree split point, and made of High Speed Steel (M2). It is black oxided to prevent corrosion while enhancing appearance.

3/16" Short Length Drill Bit

A 3/16" Short length (1.1875") drill with a 135 degree split point, and made of High Speed Steel (M2). It is black oxided to prevent corrosion while enhancing appearance.